Nope, I do not, sorry. Maybe I can at least highlight some points where an extra attention is needed.
- Cockpit has quite nice details so it deserves a better instrument panel (I used one from Smer?s Hi-Tech PE set) and seat belts (used ones from the same PE set). Adding side walls would be good as there are just "holes" to wings (I did not on this one). Adding some details in gunner's compartment is not a bad idea as well (I did not on this one).
- Propeller spinner has been replaced with one from Eduard's kit.
- The same kit became a donor of the clear canopy parts. Some care is needed to fit the wind screen and the mid part above the fuel tank (open canopy is a good camouflage for its poor fit).
- Rockets with rails come from Smer?s kit. Original parts are rather useless. The same for bombs with bomb racks.
- Outer wings fit to midsection is rather poor. Careful here.
- Rudder mass balance replaced with a scratchbuilt one.
- Gun barrels and pitot tube from injection needles.
- If possible replace the exhausts.
- If possible replace the UBT machine gun (I did not on this one) with mounting and ammo box.
- MLG struts are rather fragile so be careful. I did break one :/
- I've re-scribed the outer wings reinforcing belts. MMP book is a good reference here (scale drawings).
- Replace the wing-root dust filter.
- Drill the openings for spent cartridges on the wing undersides.
- The wings-to-fuselage joint is rather nasty. Filling and sanding ahead!
- Panel lines are very fine, some almost gone and need to be re-scribed. Same for rivets.
- Add the VV-1 gun-sight.
Dako "Il-2M" kit is the most suitable for a two-seater of late Zavod 30 production. The kit has corresponding wooden outer wings (reinforcement belts missing), wooden rear fuselage, midsection of later type, gunner's canopy of later type, short tail landing gear fairing. Use the taller antenna mast and VYa-23 guns.
If you want to build a late two-seater of Zavod 1 you need to correct the tail landing gear fairing.
If you want to build early production aircraft from Zavod 1/30 you need to modify the midsection and use the correct gunner's canopy (or build a machine with this part removed). Shorter antenna mast and ShVAK cannons should be used.
Building a Zavod 18 aircraft would be the most complicated option as you need to re-scribe the metal outer wings panel lines. Always metal outer wings and VYa-23 cannons for Zavod 18 aircraft, regardless if single seater, two seater with straight wings or KSS.
This was a brief extract (if I missed something important, gentlemen experts here will add it for sure), scale drawings and detail description for each modification can be found in the MMP book
This is my first Dako kit built. I have 3 more. As now I'm familiar with its strenghts and weak points, I know what is awaiting me and hope for better results
Viktor