Title: Modelsvit 1/48 Yak-9DD Post by: dragonlanceHR on May 15, 2015, 12:28:12 PM Just saw KSL's post on HS forum. Finally :-)
http://scalemodels.ru/news/8816-1-48-jak-9dd-ot-Modelsvit.html (http://scalemodels.ru/news/8816-1-48-jak-9dd-ot-Modelsvit.html) http://scalemodels.ru/modules/forum/img_1131335_1431635763_1.jpg.html (http://scalemodels.ru/modules/forum/img_1131335_1431635763_1.jpg.html) Vedran Title: Re: Modelsvit 1/48 Yak-9DD Post by: Troy Smith on May 15, 2015, 02:24:44 PM Hi Vedran
yes, that is good news...except for my stash of LTD and ICM kits..oh well. Built and sprue shots on Hyerpscale courtesy of Sergey http://www.network54.com/Forum/149674/thread/1431639121/Finally+new+1-48+Yak-9%21 (http://i47.photobucket.com/albums/f170/KosachevSergey/Jak-9DD.jpg) (http://i47.photobucket.com/albums/f170/KosachevSergey/1431635763_1.jpg) And looks a good replica from these pics as well :) A new tool Hurricane AND Yak-9, 2015 is getting better kit wise all the time! cheers T Title: Re: Modelsvit 1/48 Yak-9DD Post by: learstang on May 16, 2015, 05:55:34 PM T'would be nice to see them do it in the gentleman's scale*, though.
Regards, Jason * - 1/72nd scale, of course. Title: Re: Modelsvit 1/48 Yak-9DD Post by: xan on May 16, 2015, 09:39:07 PM at last, a new yak-9 at 1/48 scale , it's a great new!
I hope yak-9D or early will soon appears! Xan Title: Re: Modelsvit 1/48 Yak-9DD Post by: Troy Smith on August 04, 2015, 03:47:08 AM I posted this in the Yak-2 thread, but thought maybe of more use here.
regarding the Yak-9DD, and limited markings options, Sergey Kosachev of Vector resin points out in this thread http://www.network54.com/Forum/149674/thread/1434464975 Quote This Yak-9 is the best on the market, as to the colorfull options you will not find them for DD variant. There are only 2 pictures of the Yak-9DD I aware of and they have only numbers and red spinners. On the other hand you can easily get any late model Yak-9 (T/K/M) from DD. You should to fill 2 additional fuel tanks on the lower wing surface, and the fuel caps for them on the upper surface: [ (http://i47.photobucket.com/albums/f170/KosachevSergey/1432588370_a11.jpg) kit also have extra spinner for a Yak-9T. Concerning the decals, if you'll wait a little, Begemot will release a huge sheet for 100+ variants soon. It'll be in the same vein as their sheets for I-16, Yak-3, Su-2, Po-2 and Yak-7: http://www.begemotdecals.ru/showpos.php?〈=2&pic=1&id=110 Sergey. HTH T Title: Re: Modelsvit 1/48 Yak-9DD Post by: Seawinder on February 21, 2016, 06:49:51 AM I just received a copy of this kit. While it looks pretty good in the box (at least on a par with their earlier Yak-1), I'm really disappointed to find only a one-piece canopy. I like to build my models with open canopies, which in this case will be difficult because of the way the sliding section overlaps the rear section. has anybody found any replacements that work?
Title: Re: Modelsvit 1/48 Yak-9DD Post by: Massimo Tessitori on February 21, 2016, 07:59:54 AM Hi,
Quote I just received a copy of this kit. While it looks pretty good in the box (at least on a par with their earlier Yak-1), I'm really disappointed to find only a one-piece canopy. I like to build my models with open canopies, which in this case will be difficult because of the way the sliding section overlaps the rear section. has anybody found any replacements that work? If you make a research on Google with 'yak-9 vacuform canopy' you find the one made by Squadron (and perhaps other producers) for the kit of ICM. I suppose that it is adaptable to this kit too (but this has to be checked). Regards Massimo Title: Re: Modelsvit 1/48 Yak-9DD Post by: Troy Smith on February 21, 2016, 05:35:16 PM Hi
there is a build on Britmodeller at the moment, converting to an 'M', using the Metallic Details etch set, and using a Falcon vac canopy (Falcon make Squadron's canopies as well) http://www.britmodeller.com/forums/index.php?/topic/234997702-modelsvit-148th-yak-dd-built-as-a-9m-builders-notes regarding the canopy Quote You can also see in the first pic the Falcon vacform rear canopy section being trial fitted. The rear cockpit sill needs some trimming for this to work, and the actually canopy needs to be spread a little to match the width - hence the plastic card rims I've added for it to catch. (http://img.photobucket.com/albums/v189/kunac/image.jpg2_zpsnfgmm9fd.jpg) Title: Re: Modelsvit 1/48 Yak-9DD Post by: Troy Smith on February 27, 2016, 03:50:21 AM while hunting for something else, I found this thread,
http://www.master194.com/forum/viewtopic.php?f=3&t=87928 has an interesting comparison between the Modelsvit Yak-9 with the LTD Yak-9 kit. LTD is the lighter coloured plastic (http://i2.photobucket.com/albums/y10/gedeon/Yaks/P1012035_zpsqshij045.jpg) (http://i2.photobucket.com/albums/y10/gedeon/Yaks/P1012034_zpscf5wrzwq.jpg) hope of interest Title: Re: Modelsvit 1/48 Yak-9DD Post by: Apex1701 on March 01, 2016, 04:58:48 AM Hi comrades,
I finished a Modelsvit Yak-9DD as a early 9T. It represent white 48 of Alexei Mashenkin flown in september 1943. All the parts for a 9T are present in the kit, except the armored headrest. The kit is not too hard to construct, but attention is needed in the cockpit because some parts are missing. When I will redo one I will surely use photoectch for the cockpit. Main difficulty is the placement of the undercarriage parts. The instructions are not very clear about it to say the least. Here some pictures showing the end result. (http://i38.photobucket.com/albums/e136/Apex1701/Yak-9T/SAM_0003_zpseihch03r.jpg) (http://s38.photobucket.com/user/Apex1701/media/Yak-9T/SAM_0003_zpseihch03r.jpg.html) (http://i38.photobucket.com/albums/e136/Apex1701/Yak-9T/SAM_0005_zpsbw5vhdvf.jpg) (http://s38.photobucket.com/user/Apex1701/media/Yak-9T/SAM_0005_zpsbw5vhdvf.jpg.html) (http://i38.photobucket.com/albums/e136/Apex1701/Yak-9T/SAM_0006_zpskk74poha.jpg) (http://s38.photobucket.com/user/Apex1701/media/Yak-9T/SAM_0006_zpskk74poha.jpg.html) (http://i38.photobucket.com/albums/e136/Apex1701/Yak-9T/SAM_0007_zpszpei3rvt.jpg) (http://s38.photobucket.com/user/Apex1701/media/Yak-9T/SAM_0007_zpszpei3rvt.jpg.html) (http://i38.photobucket.com/albums/e136/Apex1701/Yak-9T/SAM_0009_zps6zfhm1aa.jpg) (http://s38.photobucket.com/user/Apex1701/media/Yak-9T/SAM_0009_zps6zfhm1aa.jpg.html) (http://i38.photobucket.com/albums/e136/Apex1701/Yak-9T/SAM_0010_zpslutmreje.jpg) (http://s38.photobucket.com/user/Apex1701/media/Yak-9T/SAM_0010_zpslutmreje.jpg.html) (http://i38.photobucket.com/albums/e136/Apex1701/Yak-9T/SAM_0011_zpsnctqo56y.jpg) (http://s38.photobucket.com/user/Apex1701/media/Yak-9T/SAM_0011_zpsnctqo56y.jpg.html) All the best. Jean Title: Re: Modelsvit 1/48 Yak-9DD Post by: Massimo Tessitori on March 01, 2016, 06:47:23 AM Hi Jean,
it looks good, much more convincing than the older ICM kit. It's a good addiction for your collection. The possibility to make both versions with one kit was there in the ICM too, at least on the 1/72 kit that I still have somewhere in my attic. Probably I'll never build it. Regards Massimo Title: Re: Modelsvit 1/48 Yak-9DD Post by: Seawinder on March 01, 2016, 07:13:23 AM Very nice work, Jean. I hadn't realized that any 9-Ts were painted in the green /black scheme. How did you do the canopy? It looks good.
Title: Re: Modelsvit 1/48 Yak-9DD Post by: Apex1701 on March 02, 2016, 02:34:27 AM Thanks guys.
I hadn't realized that any 9-Ts were painted in the green /black scheme. How did you do the canopy? It looks good. Almost all the 9T we see are AMT-11/12, you're right.Sole exceptions being the early versions made from march 1943. Since the order about using AMT-11 and 12 was in mid-july those built before where green/black. The 812th IAP(Mashenkin's regiment) received these in july/august 1943. Main difficulty was to find the pattern. I used stills from a Yak training film found on Youtube to draw a pattern. Some of these stills are seen here : http://mig3.sovietwarplanes.com/colors/1941-43/1941-43.html All the best. Jean Title: Re: Modelsvit 1/48 Yak-9DD Post by: 66misos on March 02, 2016, 06:46:14 AM Hi Jean,
very nice. I like that subtle weathering and semi-gloss finish. IMHO it is much more appropriate than dirty hard matt surface as usually seen on the other models on Internet. Regards, 66misos Title: Re: Modelsvit 1/48 Yak-9DD Post by: Massimo Tessitori on March 02, 2016, 07:00:57 AM Hi Jean,
have you further or better stills from that movie? Regards Massimo Title: Re: Modelsvit 1/48 Yak-9DD Post by: JP on March 02, 2016, 03:15:01 PM Hi Jean, very nice. I like that subtle weathering and semi-gloss finish. IMHO it is much more appropriate than dirty hard matt surface as usually seen on the other models on Internet. Regards, 66misos Same here. I'm from the Tony Greenland school - flat is lifeless/dead. Even tanks aren't perfectly flat. I haven't used neat flat in...a long time. Title: Re: Modelsvit 1/48 Yak-9DD Post by: Apex1701 on March 02, 2016, 05:44:45 PM Hi guys,
thanks for your comments. I do love subtle weathering too. What's helped me is that the 812th IAP was using in combat their 9T for about a month when Mashenkin was shot down. How did you do the canopy? It looks good. I cut the Modelsvit canopy in parts. Since the center part was ruined I used an Accurate Miniatures Yab-1b center part.Yes Massimo I have the stills and I posted them in my constructions posts on Master 194. www.master194.com/forum/viewtopic.php?f=4&t=90235&start=40 Do you want me to post them in the Yaks forum pages ? Jean |