|
Title: My photo-etched parts for 1:48 model I-15bis Post by: GoNzA on April 13, 2011, 05:17:18 PM I want to present to your attention a set photo-etched parts which I have developed for model I-15bis.
I not so well know English language. I will show more, than to tell. :) It is made on three plates of a brass. (http://gonza.moy.su/_pu/0/s25954088.jpg) (http://gonza.moy.su/_pu/0/25954088.jpg) Thickness of a plate №1 - 0,2 mm. (http://gonza.moy.su/_pu/0/s11196693.jpg) (http://gonza.moy.su/_pu/0/11196693.jpg) A thickness of plates №2 and №3 - 0,1 mm. (http://gonza.moy.su/_pu/0/s12177845.jpg) (http://gonza.moy.su/_pu/0/12177845.jpg)(http://gonza.moy.su/_pu/0/s02099718.jpg) (http://gonza.moy.su/_pu/0/02099718.jpg) There is two variants of instrument panel: (http://gonza.moy.su/_pu/0/s41516093.jpg) (http://gonza.moy.su/_pu/0/41516093.jpg) On each machine gun it is visible the individual serial number. (http://gonza.moy.su/_pu/0/s70672361.jpg) (http://gonza.moy.su/_pu/0/70672361.jpg) I have drawn the assemblage scheme (unfortunately only in Russian). (http://gonza.moy.su/_nw/0/s91910041.jpg) (http://gonza.moy.su/_nw/0/91910041.jpg)(http://gonza.moy.su/_nw/0/s23167438.jpg) (http://gonza.moy.su/_nw/0/23167438.jpg) Also has altered from the original Technical specification the instruction in ancient style. (http://gonza.moy.su/_nw/0/s88485246.jpg) (http://gonza.moy.su/48014I-15bis.pdf) Here so all set looks (ruler isn't include). (http://gonza.moy.su/_pu/0/s55214104.jpg) (http://gonza.moy.su/_pu/0/55214104.jpg) I can make such set for all who wants to construct 1:48 model of plane I-15bis. Mail to me for details : gonza(http://gonza.moy.su/a-.gif)front.ru Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: learstang on April 13, 2011, 05:22:59 PM Brilliant work, Anatoliy! I hope when the 1/48th and 1/72nd scale ICM I-153's are released you will do sets for them.
Regards, Jason Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: Massimo Tessitori on April 13, 2011, 05:37:24 PM Hi Anatoliy,
absolutely impressive work! Very well done. Thank you for showing it. Regards Massimo Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: xan on April 13, 2011, 11:35:22 PM Hello, it's wonderfull!
I send you immediately a mail! did you do other photoetched ? Xan Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: GoNzA on April 14, 2011, 03:33:06 AM Jason
Massimo Xan Thanks for an appreciation of my work! In the near future I will let out sets for Polikarpov's planes: I-15, I-153 and I-16 (1/48th scale). Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: Markino on April 19, 2011, 12:11:06 PM Hi Anatoly,
that's wonderfull work, very impressive!! I saw another work of you on scalemodels.ru: http://scalemodels.ru/modules/forum/viewtopic_t_21930_start_260.html I have also a Zvezda La-5FN in 1/48 and in the next time I will contact you for additional informations... ;) ;). But regarding...LaGG-3...nothing about it on your workbench?? Ciao! Marco Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: GoNzA on April 19, 2011, 12:34:32 PM Markino
Thanks! I watch closely this work too. It allows me to improve my set for La-5/La-5FN (David aka gedd uses it). - http://gonza.moy.su/publ/aviacija/aviacija_1_48/48015/2-1-0-6 I do a set for LaGG-3 too: Photoetched for model LaGG-3, 1:48 (GoNzA, cat. №48012) (http://www.dishmodels.ru/gshow.htm?p=8803) After the publication of article I have added in it new details. You can look at photos here: http://gonza.moy.su/publ/aviacija/aviacija_1_48/48012/2-1-0-5 PS: Probably our construction of models LaGG-3 of two fighting companions - Galchenko and Mironov (http://scalemodels.ru/modules/forum/viewtopic_t_20346.htmll) will be interesting to you. Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: Markino on April 19, 2011, 04:39:57 PM Hi Anatoliy,
many thanks for your kindly reply and additionals informations. I send you an email for more informations. Best regards. Marco Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: Massimo Tessitori on April 19, 2011, 10:06:41 PM Quote I watch closely this work too. It allows me to improve my set for La-5/La-5FN (David aka gedd uses it). - http://gonza.moy.su/publ/aviacija/aviacija_1_48/48015/2-1-0-6 Good works. I didn't know that you make so many sheets.I do a set for LaGG-3 too: Photoetched for model LaGG-3, 1:48 (GoNzA, cat. №48012) After the publication of article I have added in it new details. You can look at photos here: http://gonza.moy.su/publ/aviacija/aviacija_1_48/48012/2-1-0-5 Regards Massimo Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: learstang on April 20, 2011, 01:33:32 AM Thank you for the link to your site, Anatoliy! That gun ring for the IL-2; is that UBT also your invention?
Regards, Jason Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: GoNzA on April 20, 2011, 01:45:20 AM ... That gun ring for the IL-2; is that UBT also your invention? No. It's MiniWorld product (Oleg Kavatsuk). http://www.dishmodels.ru/gshow.htm?p=8872 His machine guns 1/72 is realy "Das ist phantastisch!" ;D http://www.hannants.co.uk/search/index.php?product_category_id=&product_division_id=&manufacturer_id=362409&code=&product_type_id=&scale_id=&keyword_search=&setPerPage=25 Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: learstang on April 20, 2011, 04:49:25 AM Thank you for the information, Anatoliy! The UBT with your VUB-3 looks brilliant! I've seen Mr. Kavatsuk's work in 1/72nd scale; it really is fantastic.
Regards, Jason Title: Re: My photo-etched parts for 1:48 model I-15bis Post by: Pascal on May 06, 2011, 10:57:48 AM Hi Anatoliy,
These sheets are wonderful ! I guess I'll send you a mail when I work on my La-5FN... Regards, Pascal |