|
Title: Kamov KA-28 Helix (KA-27) - Bronco models 1/200 Post by: Tibor Varga on February 01, 2012, 05:41:03 PM Hello, I guess this is the first topic dealing with Kamov subject :-)
This kit was intended as an onboard accessory for 1/200 scale Bronco and Trumpeter Sovremenny Class Destroyers, well too small for an airplane, and just way too big for a ship accessory, here's the result: (https://lh4.googleusercontent.com/-ZbNMGPf4BIA/Tykj-kHQDPI/AAAAAAAABcY/JNQnvI0fkh0/s640/IMG_4386_cr.jpg) (https://lh4.googleusercontent.com/-O8Bc9I9Q7BM/Tykj9mEo5iI/AAAAAAAABcQ/k9OXiAB0XR0/s640/IMG_4385_cr.jpg) (https://lh6.googleusercontent.com/-JQ_ba6F4w2g/Tykj8lMO6AI/AAAAAAAABcI/r0uUw_rLkb0/s640/IMG_4384_cr.jpg) (https://lh3.googleusercontent.com/-WwHLf1Pft5g/Tykj7Na9p3I/AAAAAAAABb4/F8hXbgSSmaI/s640/IMG_4382_cr.jpg) (https://lh5.googleusercontent.com/--zhXV1kvmXI/Tykj72OsqLI/AAAAAAAABcA/tfP1EjwqlYc/s640/IMG_4383_cr.jpg) (https://lh4.googleusercontent.com/-knKnGvQ1DXo/Tykj6dZtnMI/AAAAAAAABbw/8msq2aTMJ_0/s640/IMG_4381_cr.jpg) (https://lh6.googleusercontent.com/-uPG9Hj4bNkc/Tykjy8iJQUI/AAAAAAAABaw/w0g3jtvo82w/s640/IMG_4373_cr.jpg) (https://lh5.googleusercontent.com/-MiM7Je1Sio4/Tykj5eoSfDI/AAAAAAAABbo/ax9kDvCMwxI/s640/IMG_4380_cr.jpg) (https://lh4.googleusercontent.com/-wsagxoTz3ZQ/Tykj2PxSu9I/AAAAAAAABbQ/0qRO7X4vyK4/s640/IMG_4377_cr.jpg) (https://lh3.googleusercontent.com/--wavNaigWeY/Tykj0TBkgjI/AAAAAAAABbA/S2UUX2CZXGo/s640/IMG_4375_cr.jpg) (https://lh6.googleusercontent.com/-AoQLnf8TpVw/Tykj3QE3PjI/AAAAAAAABbY/pMdD49aqeMA/s640/IMG_4378_cr.jpg) (https://lh5.googleusercontent.com/-tdCe4jQQfdM/Tykj1EEz1yI/AAAAAAAABbI/11VN9M-zLIs/s640/IMG_4376_cr.jpg) Any comments welcome Best regards Tibor Title: Re: Kamov KA-28 Helix (KA-27) - Bronco models 1/200 Post by: Palanadine on February 01, 2012, 06:07:29 PM Very well done for such small scale!!! :o
Speaking of which, just how much does it measure? Title: Re: Kamov KA-28 Helix (KA-27) - Bronco models 1/200 Post by: Tibor Varga on February 01, 2012, 06:15:49 PM Hi, thanks, it's about 6cm long. This size enables the heli to land on the smaller tamiya acrylics bottle or on a humbrol bottle in cace of emergency :)
The problem is that you can still observe many details in this scale, but it is rather hard to improve or paint these details to get a comparabel scale effect similar as in bigger scales. Compared with a 1/144 scale eduard mig21: (https://lh4.googleusercontent.com/-lWthzTP849w/Tx3W6fFV4QI/AAAAAAAABWs/p8X4-tguL9E/s640/IMG_4093_cr.jpg) Regards Tibor Title: Re: Kamov KA-28 Helix (KA-27) - Bronco models 1/200 Post by: Massimo Tessitori on February 01, 2012, 08:22:00 PM Hi Tibor,
nice and surprising model, very well made. Regards Massimo Title: Re: Kamov KA-28 Helix (KA-27) - Bronco models 1/200 Post by: John Thompson on February 01, 2012, 10:34:47 PM Hi Tibor! You did a great job of weathering such a tiny model - it looks quite realistic. Welcome to the forum!
John |